Universal power law behavior of the AC conductivity versus frequency of agglomerate morphologies in conductive carbon nanotube‐reinforced epoxy networks

The Jonscher universal power law for ac conductivity versus frequency (f = ω/2π) in the dispersion region was tested for a multiwall carbon nanotube/epoxy nanocomposite. The effect of changes in agglomerate morphology on the fitting parameters A and n in the equation σ_{ac =} Aωⁿ was investigated. Changing nanotube agglomerate morphology was tracked by optical microscopy through curing. Evolving morphology was compared alongside ac conductivity obtained via a broadband dielectric spectrometer to elucidate possible physical meaning of the universal power law in the context of this system. The ?logA/n was unaffected by changes in agglomerate morphology affected during cure, yet connected with each other in their dependence on temperature. For this system, the relationship between the fitting parameters in the universal dynamic response equation remains empirical at this stage with regard to biphasic “texture” or morphology within such a network. Electrical conductivity σ versus frequency ω for a composite consisting of agglomerated multiwalled carbon nanotubes dispersed throughout a cured epoxy matrix was discovered to follow the empirical universal dynamic response equation of Jonscher. The frequency behavior of the exponent n is discussed in terms of underlying morphology throughout which charge carriers migrate. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1918–1923     

Thieno[3,4-c]pyrrole-4,6-dione based copolymers for high performance organic solar cells and organic field effect transistors

Donor-acceptor type copolymers have wide applications in organic field-effect transistors and organic photovoltaic devices. Thieno[3,4-c]pyrrole-4,6-dione (TPD), as an electron-withdrawing unit, has been widely used in D-A type copolymers recently. Till now, the highest power conversion efficiency and mobility of TPD-based copolymers are over 8% and 1.0 cm² V^-1 s^-1 respectively. In this review, the recent progress of TPD-based copolymers in organic solar cells and organic transistors is summarized.     

纳米银改性树脂基托机械性能的初步研究

采用磁控溅射技术在聚甲基丙烯酸甲酯(PMMA)树脂基托表面沉积一层纳米银(Ag NPs)涂层.研究了纳米银改性PMMA树脂基托的机械性能,为改性材料的临床应用提供理论基础.根据国际标准ISO2409:2007描述的划格法对涂层与基底的附着力强度进行测试,各组试件的接触角采用静态液滴法测量,三点弯曲法检测试件的弯曲强度.结果显示,各组涂层与PMMA基底材料结合良好,各组试件的表面润湿性变化不大,其中PMMA-Ag NPs80s组疏水性略有提高,各组试件的弯曲强度均符合国家标准.     

Control of reaction mechanisms in cationically polymerized epoxy resins facilitates the adjustment of morphology and mechanical properties

Structure–property relations of cationically polymerized epoxy thermosets with different morphologies are examined. The morphology adjustment of amorphous epoxy based copolymers and partially crystalline polymer alloys is carried out with star‐shaped poly(ε‐caprolactone) (SPCL) bearing various numbers of hydroxyl end groups. These hydroxyl groups are known for their reactivity toward epoxides following the activated monomer (AM) mechanism. For this reason, four‐armed SPCL was synthesized with four hydroxyl end groups (SPCL‐tetraol) and, in addition, with successively esterified ones down to a SPCL with four ester end groups (SPCL‐tetraester). SPCL species bearing fewer or no hydroxyl end groups segregate into needle‐like nanodomains within the epoxy networks and, if the concentration is high enough, also into crystalline domains. The stronger phase separation of SPCL‐tetraester within the epoxy network compared with SPCL‐tetraol is due to a reduction of the AM mechanism. The mechanical properties resulting from different morphologies lead to a trade‐off between higher storage moduli and T_g values in the case of the more phase separated (and partially crystalline) polymer alloys and higher strain at break in the case of the amorphous copolymers. Nevertheless, in both cases toughness is improved or at least kept on the same level as for the pure epoxy resin. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2188–2199     

Copolymer architecture effects on the morphology and surface performance of epoxy thermosets containing fluorinated block copolymers

The architecture effects on phases and surface enrichment behaviors of epoxy nanocomposites containing fluorinated block copolymers are investigated by the incorporation of two novel copolymers composed of poly (2, 2, 2‐trifluoroethyl methacrylate) (PTFEMA) and poly (ε‐caprolactone) (PCL), PCL‐b‐PTFEMA and PTFEMA‐b‐PCL‐b‐PTFEMA, with identical molecular weight and composition. These fluorinated copolymers in epoxy display distinguished self‐assembled structures, as evidenced by dynamic laser scattering and scanning electron microscopy measurements. Static contact angle detection suggests that the nanocomposites display an obvious improvement in surface water repellency and a reduction in surface free energy. The enhancement in surface hydrophobicity is attributed to the enrichment of PTFEMA blocks at the nanocomposite surface and to the formation of the specific surface morphology, as confirmed by atomic force microscopy. The different architectures of the two block copolymers give rise to differences in phase‐structures, and the ultimate surface performances of composites. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1037–1045     

Synthesis and Characterization of Novel Liquid Crystalline Epoxy Resin with Low Melting Point

A liquid crystalline epoxy resin (LCE) having α-methylstilbene as a mesogenic unit and an ethylene-oxy unit as a spacer (DGE(C2-MS-C2)) was synthesized and characterized. DGE (C2-MS-C2) has a lower melting point (MP) compared to the diglycidylether of 4,4′-dihydroxy-α-methylstilbene (DGEDHMS). The curing of DGE (C2-MS-C2) with diaminodiphenylethane (DDEt) in a mesophase generated a liquid crystalline (LC) network, which have a more highly layered structure than DGEDHMS. The LC network showed extensively large fracture energy on a tensile test. Introducing spacers outside the mesogen unit promotes the mesogen unit to form a highly ordered structure, which enhances the versatility of LC epoxy resins.     

A new antibacterial benzophenone glycoside from Psidium guajava (Linn.) leaves

Bioactivity-guided fractionation of methanol extract from the leaves of Psidium guajava L. (Myrtaceae) yielded a new benzophenone glycoside, Guajaphenone A (2) together with two known compounds, Garcimangosone D (1) and Guaijaverin (3). Their structures were elucidated by analysis of spectroscopic data including 1D and 2D NMR and electrospray ionisation mass spectrometry (ESI-MS). The isolated compounds were screened against standard strains of Gram-positive and Gram-negative bacteria using broth dilution assay method, and the MIC values determined and compared with reference antibiotic ceftriaxone. They were found to have significant antibacterial activities against Escherichia coli and Staphylococcus aureus with all of them showing better activities against S. aureus, but displaying weaker activities, in comparison to ceftriaxone. However, despite reduced effect of these compounds against the organisms, this work opens the perspective to use these molecules as ‘leads’ for the design of novel and selective drug candidates for some tropical infectious diseases.     

Chemical investigation of metabolites produced by an endophytic Aspergillus sp. isolated from Limonia acidissima

Endophytic fungi are considered as a good source to produce important secondary metabolites with interesting bioactivities. In a continuation of our studies towards the search for environmentally friendly bioactive compounds from Sri Lankan flora, we investigated the secondary metabolites produced by the endophytic fungi Aspergillus sp. isolated from the seeds of the popular edible fruit Limonia acidissima L. of the family Rutaceae. The pure culture of the Aspergillus sp. was grown on potato dextrose broth media. After 4 weeks fermentation, fungal media were extracted with organic solvents. Chromatographic separation of the fungal extracts over silica gel, Sephadex LH-20 and RP-HPLC furnished flavasperone (1), rubrofusarin B (2), aurasperone A (3), fonsecinone D (4) and aurasperone B (5). Compounds 1–4 showed moderate activities in brine shrimp toxicity assay. This is the first report of the ¹³C NMR data of compounds 4 and 5.     

Two new eudesmane-type glucopyranosides from the fruits of Daucus carota L.

Two new eudesmane-type glucopyranosides have been isolated from the fruits of Daucus carota L. On the basis of their spectroscopic and chemical evidence, the new compounds were elucidated as daucucarotol-10-O-β-d-glucopyranoside (1) and decahydro-7-[(2-O-β-d-glucopyranosyl)-isopropyl]-1β,4aα-dimethyl-(1α,4α,8aβ)-naphthalenetriol (2). Compounds 1 and 2 showed moderate antitumour activity against human ECA-109 and gave IC₅₀ values of 23.22 and 26.76 μM, respectively.